Gear Sweet_Protection_Strutter_1

Published on September 27th, 2012 | by bobby@coloradokayak.com

2

The 2012 Sweet Protection Strutter Review

2012_Sweet_Protection_Strutter_Header2

The 2012 Sweet Protection Strutter Whitewater Helmet Review

The 2012 Sweet Protection Strutter is a unique whitewater helmet, packed to the brim with technology and style. It utilizes LFT, or Long Fiber Thermoplastic. NO, LFT is not price point plastic, and no Sweet did not do this to cut cost. The Strutter is a no expenses spared whitewater helmet, that has a  pre-preg carbon fiber inner shell (protection, strength and rigidity) that protects the forehead and temples, and an EVA shock absorbing foam liner.  LFT technology, which is used on the shell,  is a long fiber thermoplastic, which is a mix of polyamide’s (plastic) and fiberglass. It was originally developed as an alternative to metal casting (lighter, more flexible and stronger). The reason that Sweet switched to this technology is because they now have control over stiffness and flexibility in certain parts of the helmet. In terms of fit and absorbing impact, the 2012-2013 Strutter is safer. With the addition of the OCCI-GRIP retention system, Sweet seems to have come up with a solid combo of aesthetics, performance and safety. Here is some detailed information as to why the new Strutter may be the most technologically advanced whitewater helmet in the world.

Specs:

Sweet_Protection_Strutter_2013_Specs
Sweet_Protection_Strutter_2013_Color_Selection

Pros:

  • LFT TECHNOLOGY ADDS TO THE OVERALL SAFETY OF THE STRUTTER: The use of LFT in the outer shell of the new 2012 Sweet Protection Srutter will significantly improve it’s overall safety. LFT is essentially a long fiber (as opposed to a short fiber) of plastic mixed with fiberglass. It’s injected into the shell of the helmet, which allows Sweet to determine where it will be stiffer, and where it will have some flex. Since the Strutter is meant to take multiple, slow impacts (compared to snow sports that take fewer high energy hits), having some flex in certain areas will only help the shock absorption. This technology was adapted largely from the automotive industry, where manufacturers were looking for ways to divert from metal castings, without losing strength. In short, they wanted something lighter and more flexible than metal, but also just as strong.Sweet_Protection_Strutter_2013_LFT_Technology
  • CARBON FIBER INNER SHELL: The shell of the 2012 Sweet Protection Strutter is constructed of pre-preg carbon fiber, which is the lightest and stiffest version of the composite available today (used in F1 cars, high end sporting gear, etc). It’s there to protect the weak spots of your noggin, like the forehead and temple. The carbon inner shell also improves fit. It is formed to the shape of the paddlers head, and when used with the comfort pads, triangular tensioning straps, and OCCIGRIP, the fit is spot on.
    Sweet_Protection_Strutter_2013_LFT_Carbon

    Fit and protection. The inner shell adds more than just bling. Your temples and forehead are protected.

    Sweet_Protection_Strutter_2013_LFT_Carbon_EVA.jpg

    The use of LFT and carbon fiber are a sweet combo.

  • MAJOR UPGRADES FROM THE 2012 STRUTTER: The OCCIGRIP no roll tension system is all new. Also, the 2013 Strutter has a carbon fiber inner shell, and a LFT outer shell (as opposed to 1 carbon fiber outer shell used in previous years). Sweet has always been known for providing carbon fiber stiffness in their helmets. This year, they also added LFT, which allows them to tune the stiffness, and have more control over spreading out the force of impacts. The comfort pads have also been completely redesigned,which may not sound like a major improvement, but they do a lot to dial in a perfect fit. They are way ahead of the curve in regards to technology and safety.
    Sweet_Protection_Strutter_2013_Old_Versus_New.jpg

    The old tension system versus the new OCCIGRIP. Major changes in the adjustment department.

    Sweet_Protection_Strutter_2013_Old_Versus_New_Carbon_LFT.jpg

    The old Strutter was constructed entirely out of carbon fiber, with an EVA liner. The new one has a LFT shell, and a carbon fiber inner shell…and then an EVA liner. It’s safer and has a better fit.

  • SWEET SPONSORS THE WORLDS TOP ATHLETES. WORLD CLASS PADDLERS AND SNOW SPORTS COMPETITORS DEMAND THE BEST GEAR. THEY ALSO PROVIDE GREAT FEEDBACK: It’s reassuring to know that the top water and snow sports athletes in the world are wearing Sweet helmets, and providing their feedback. No one else out there is more familiar with the impacts and fit issues of whitewater helmets, than someone who spends 250+ days a year on super stout class V and gargantuan freestyle features. Evan Garcia, Ben Marr, Rush Sturges, Fred Norquist, Aniol Serrasolses, Terje Haaksonen…the best in the biz are on the Sweet short list.
    Sweet_Protection_Strutter_2013_iconic_Photo

    Hands down, the best paddlers in the world, are sponsored by Sweet Protection.  These guys (and girls) put their life on the line for a living. They need a helmet that keeps their heads safe.

    Sweet_Strutter_2013_Big_Water

    The North Fork Championships. The Strutter makes a good choice for a big water helmet. It keeps splash out, and helps with sun glare.


    Terje’s legit. Nice line huh?

  • THE STRUTTER IS IDEAL FOR SUP: The Strutter was designed with playboating and river running  in mind. It is constructed to withstand the impacts associated with being upside down, inside of your kayak, in a shallow river. Because of the sun brim, low profile design,  light weight, and sturdy / comfortable fit, it also makes a great helmet for stand up paddling on the river, as well as river surfing.
    Sweet_Protection_Strutter_2013_Stand_Up_Paddle_River_Surfing

    Testing out the Strutter on The Staircase wave after work. Getting dunked in a surf wave a couple dozen times is a good way to see how good the fit is.

    Sweet_Protection_Strutter_2013_Great_SUP_helmet.jpg

    The sun brim does a great job at keeping the glare out. It does not sit too low and adversely impact vision.

  • THE OCCIGRIP, COMFORT PADS AND 4 ANCHOR TENSIONING SYSTEM KEEP THE STRUTTER ON TIGHT:  Similar to outfitting a boat, achieving a proper helmet fit is a bit of an art. Usually, whitewater helmets have adjustment straps that are used in combination with some sort of tensioning apparatus that fits on the back of your head.  The Strutter is no exception. It has a 4 anchor tensioning system with 2 triangular adjustors on each side, and then one near the buckle on the chin. It also comes with comfort pads that help to make the helmet snug, and allow for different sized heads to fit inside of the EVA liner. The OCCIGRIP is gravy, and further tightens everything down. In rare instances, the OCCIGRIP has been known to slip a little bit. Sweet has some stiffer springs and can swap one out with you, if you need one. We have sold over 200 Strutters, and have had 1 spring return.
    Sweet_Protection_Strutter_2013_Proper_Tensioning_Important.jpg

    Properly tensioning the straps, and then tightening it up with the OCCIGRIP creates a great fit.

    Sweet_Protection_Strutter_2013_Occi_Grip_Closeup2.jpg

    The new for 2012 OCCIGRIP.

    Sweet_Protection_Strutter_2013_Occi_Grip_Closeup

    The OCCIGRIP provides lateral support in the rear of the helmet.

Cons:

  • THE LOW PROFILE DESIGN MAY NOT BE IDEAL FOR SOME TYPES OF WHITEWATER: As previously mentioned, the Strutter was designed to be used for river running and playboating. Some work has been done to the brim over the years, and with the addition if the OCCIGRIP, it has a much better fit on your head. But it still has less overall protection than other full cut helmets that are designed for paddling off of waterfalls, low volume creeks, and high consequence class V obstacles. If you spend your winters in Chile, or somewhere with a lot of gnarly whitewater, check out the rest of Sweets lineup; they are designed specifically for that type of padding. Sweet_Protection_Strutter_2013_Full_Lineup
  • PRICE: The Strutter retails for just under $200. You can find baseball hat style whitewater helmets for less money. Before you pull the trigger on a price point helmet that looks similar, I would ask the following questions. Do they have a carbon fiber inner shell with EVA foam? Does the competition use LFT to control the force of impact, and create a safer environment for your brain? There’s quite a bit of technology that goes into building a helmet like the Strutter, and that technology is usually not cheap. If you want cutting edge design, be ready to pay a little bit more.

The verdict:

The new 2012 Sweet Protection Strutter is a very alluring helmet. At first, it appears to be a plastic lid, and one may wonder why it is still priced at the higher end of the whitewater helmet spectrum. Upon close inspection, it becomes clear that the Strutter does not divert one bit from the Sweet Protection mission statement of providing the highest quality head protection possible, with a focus on safety, performance, aesthetics and fit. LFT, pre-preg carbon fiber, an EVA foam liner and sweet color options combined into one lid put the 2012 Sweet Protection Strutter on the top of anyone playboater, river SUP’er or downriver paddlers list.
WANT A FREE 2012 SWEET PROTECTION STRUTTER? FOR FREE? CHECK OUT THE LINK, WE’RE GIVING AWAY A $2350+ SUP PACKAGE INCLUDING A STRUTTER AND PAIR OF SHAMBALA SHORTS:
http://woobox.com/jqve6w

Tags: , ,


About the Author



2 Responses to The 2012 Sweet Protection Strutter Review

  1. Not so sweet says:

    What about the bad springs on the 2012 Strutter and why is no one warning people? I guess people will be notified after a serious injury.

    • I hear what you are saying. For what it is worth, we have sold over 200 2012 Strutters at CKS, and have had 1 spring replaced. The warranty ratio is less than 1%, which is not so bad for an item. I wish it were 0% though!

      I think that the main point to take home, is that if the Strutter has the straps adjusted properly (all 2 tensioners and chin strap), as well as the comfort pads in the right spot, the OCCIGRIP is not going to be the only thing holding the helmet on your head. It will stay on no matter what. The carbon shell is solid, and fits like a glove. The triangular straps tighten the lid even further…

      I have worn the 2012 Strutter over 100 days and can attest to the fact that if the straps are tight, the grip in the back is not as important…It is nice to have, but is by no means, the only thing holding the helmet on…It is purely a form of redundancy.

      Also, Sweet is one of the best companies out there in terms of progression, quality of design team, and overally safety. You can be rest assured that they took care of the issue and will have the helmets dialed in 2013…

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Back to Top ↑